Fully Automatic Saw Chain Sharpener.
Sharpens all sizes from 1/4" to 3/4" Harvester Chain. Even Pointed Tooth (Pack Cutting) Chain.
The Dinasaw "T-Rex" is fast, extremely accurate and will sharpen most styles of chains. Size is not important. From the small arborist chain through to 3/4" harvester** chain, even Pointed Tooth** (pack cutting) chain. All sharpened automatically and with very few adjustments needed when changing between chains.
Fast is good, especially when it comes to sharpening. High feed speed introduces less heat to the teeth thereby maintaining the metal's temper. The T-Rex can grind up to 60 teeth per minute, with both left and right hand teeth sharpened in the one pass.
Left image: Rear machine sharpening "scratcher" chain.
Unsequenced joins are not a problem as the T-Rex can look for the next tooth and correct the grind angle to suit. Automatic operation at up to 50 teeth per minute frees you for other jobs. The machine can be bench, floor or wall mounted . The positive cam operated chain clamp ensures the tooth is securely held only while being ground and then immediately released to allow indexing of the next tooth.
Performance? Outstanding.
Cost? Minimal.
The Dinasaw T-Rex chain sharpener will quickly repay your investment -consider the efficiencies gained:
-
Reduced bar wear.
-
Increased chain life.
-
Increased cutting speed.
-
Reduced labor costs.
-
Fast, consistent sharpening.
-
User friendly operation.
T-REX Features:
Please Note: AC power supply standard with automatic machine.
- Cast aluminum grinding motor arm for strength and accuracy.
- Hardened steel cams for durability and reliability.
- Ball bearings.
- Hardened steel chain clamp.
- Cam indexing for absolute accuracy in grinding.
- High grinding speed reduces heat build up in teeth (up to 50 teeth per minute).
- Variable feed speed from 5 to 50 teeth per minute.
- Automatic tooth detection.
- Full electronic control.
- Infinitely adjustable grinding head from 0° to 35°.
- 12 volt DC, 110vac or 240vac operation.
- All chain sizes up to 3/4" harvester chain.
- Pointed tooth (pack cutting) chain.
- Value.
Handi-REX Chain Sharpener
This machine has all the features of the T-REX without the electronic control system. Simply turn the handle, and the Handi-Rex will sharpen all chain cutters, both left and right in the one pass. Any top plate angle from 0° to 35°. Irregular chains (i.e. chains with 2 left or right cutters in succession) can be easily sharpened. All the efficiencies of the T-REX are built into the Handi-Rex,
-
Speed Manual (up to 40 cutters per minute).
-
Accuracy (cam operated feed).
-
Cool Grinding.
-
Versatile (most chain styles and sizes)
-
Value for Money.