SAFETY PROCEDURES
· Always wear a safety visor
· Always wear a dust mask
· Never stand or allow other people behind machine.
· Do not operate machine without safety guards in place
· Always check grinding wheels for cracks before use
· Keep hands out of machine when connected to power
Specifications and safety measures
| Requirements | Description | Range |
| Temperature | Operating | +5° to +35° Celcius |
| Power | Current Requirement | 8 amps continuous |
| Over current & Overload protection | 15 amp fuse | |
| Voltage operating range | 12 to 15 volts DC Stabilised & Regulated +/- 0.1% | |
| Safety | AC input | It is recommended to fit a residual current protection device when using an AC/DC power source. |
| AC Supply | Disconnect the power supply when not in use | |
| Guards | Do not use unless all safety guards are fitted. | |
| Maintenance | Disconnect from power before performing any maintenance. | |
| Grinding wheels | Check speed rating and condition before use | |
| Environment | Operating | Use in a ventilated and well lit area. |
| Weight | Gross | 22 kg |
| Installation | Positioning | Machine should be positioned in such a way as to prevent access to the rear when machine is operating. |
| Transportation | Lifting | Lift only from underneath the machine. |
| Transporting | Use the original packagin |